Features and Benefits  

Woodward Ramps and Rails stacks up against the competition

Woodward Ramps and Rails Competitor's Products
	No onsite manufacturing or welding is required. Our ramps and rails are fully manufactured when delivered, for precise fit and easy installation.
	Onsite welding can leave rough edges for an unattractive finish and riding hazards. Sharp edges and gaps create poor riding surfaces.
	Durable, all steel structure provides maximum strength for heavy use by boarders, bladders, and BMX riders.
	Wood structural components can shrink, swell and move with weather conditions, causing screws to back out, and riding surfaces to shift and become unstable.
	The galvanized steel coping is made from thick-walled steel tubing to stand up to the toughest grinds and bike pegs.
	Poorly finished welds require ongoing maintenance such as painting and corrosion repair.
	Steel edging on the ramps extends the product's lifetime and provides safer riding conditions.
	Surfacing without protective edging becomes worn and requires more frequent replacement.
	Stainless steel bolt-through connections resist backing out for highest safety and minimal maintenance.
	Ordinary screws back out of surfacing to create safety hazards and daily maintenance requirements. Missing screws cause surfacing to shift, resulting in unsafe conditions.
	Triple-Layer Surfacing: Galvanized sheet steel support decking followed by a non-foamed high density polyethylene acoustical layer provides superior sound dampening. The top layer is SkateliteŽ Pro, which provides the ultimate durability and ride.
	Painted metal surfacing can wear down to the bare metal and cause corrosion and create excessive noise.
	Galvanized, perforated steel sides and backs are strong and durable and allow moisture to escape.
	Plastic sides can damage easily under the daily strain of wear and tear.
	Fully enclosed sides and backs prohibit the build-up of trash, leaves and other debris that can lead to product degradation.
	Dirt and debris can collect under areas that are not enclosed and create an opportunity for vandalism.